MakerFront Bed Level Tester - Prusa i3 - Digital Depth Gauge Adapter

A small digital depth guage adapter for Makerfront and possibly other Prusa I3 clones. From the top x bar to the bottom one is 54mm on my machine, with 8mm rails. So if yours is very close to this, it should work for you. The depth gauge I bought was about $8 on amazon, I removed the spring from inside it, and as you can see in the model, it mounts to the depth gauge with two small screws. You basically remove the hole mount on the back and replace it with this. Sorry I don't have a pic of the printed/mounted thing, I'll try to do it later. Printed with ABS, sideways.

Purchase the digital gauge here:

https://www.amazon.com/gp/product/B01M103O7H