January 2, 2017
Description
This is a Customizer version of the self contained Solar Charge Box. Build your own renewable power storage for low power devices. Use Customizer to pick the parts in your charge box! Even customize each of the four power switches in this project! Connect this to your own solar panel, and a solar charge controller for off grid charging. This project was designed to help all of humanity. Please make one for yourself, and then make another one to give away to someone that would benefit from it.
Update history can be viewed in the Notes section below.
If you build one, please let me know! If you want additional components added, please let me know! If you need help, please let me know! This Customizer project will continue to improve over time. Feedback is welcomed.
**Be sure to add this Solar Controller Holder to this project! **
http://www.thingiverse.com/thing:1214533
.
Protect your battery by adding this Battery Terminal Guard cover to your Solar Charge Box! It will prevent electrical shock or short circuits on the battery terminals. http://www.thingiverse.com/thing:1696615
.
The original (outdated) Solar Charge Box ver1 can be found at this link: http://www.thingiverse.com/thing:924112
This charge box project requires:
The OpenScad file is included, but this is the Customizer version. Click on the Open in Customizer button!
The USB & ACCESSORY Plug were sourced at Amazon.ca/.com Search for Marine USB and you will easily find the parts.
.
This customizer project contains several pre-built common switches to select from. These switches can be sourced from Amazon, Walmart automotive, and also old PC power supplies switches.
.
More flexibility!
Two customizable switch profiles are included to allow you to custom design the Rectangle & Round switches for your project to match any parts you have on hand! Each of the four switches are individually selectable and customizable. Explore the options!
.
Also, each rectangular or round customizable switch is easily repositionable & rotated on the face of the box. Just use the sliders!
A wiring diagram is provided to assist with the wiring of this box. Please do not take any short cuts. This box stores enough power to cause electrical shock or fire hazard. Please be careful, be safe.
.
By following the wiring diagram in this project, it is possible to charge this box from your vehicle' 12V accessory socket using a power cable with two 12v accessory plugs.
Enjoy!
License:
Creative Commons - Attribution - Non-Commercial - Share Alike
cpayne3d
