E010 TX01 TX02 Camera Mount, Very lightweight!

This is probably the lightest printable camera mount available for the Eachine E010 Tiny Whoop!
It's 1/3 to 1/10 the weight of other mounts available!
Confirmed to fit the Furibee F36 as well!

If anyone try it out, please do share a make or comment if there's anything you think needs to be improved, all feedback is highly appreciated!

[WEIGHT OF MOUNT]
0 degree: ~2.3g
10 degree: ~2.5g
20 degree: ~2.7g

[MOUNTING INSTRUCTIONS]

1. Remove plastic cover of the E010.
2. Remove screws of PCB and remove the foam padding under the front part of the PCB
3. Push the E010 camera mount around the top of the PCB until holes line up.
4. Attach PCB to the frame again with the screws.
5. Put a piece of tape under the camera PCB to isolate it.
6. Push the camera onto the holder.
7. Connect camera to the power source.
8. Go fly!

[COMPATIBLE QUAD]
Eachine E010: www.banggood.com/Eachine-E010-Mini-2_4G-4CH-6-Axis-Headless-Mode-RC-Quadcopter-RTF-p-1066972.html

[COMPATIBLE CAMERAS]
TX01 (25mW): www.banggood.com/Eachine-TX01-Super-Mini-AIO-5_8G-40CH-25MW-VTX-600TVL-14-Cmos-FPV-Transmitter-p-1088374.html
TX02 (200mW): www.banggood.com/Eachine-TX02-Super-Mini-AIO-5_8G-40CH-200mW-VTX-600TVL-14-Cmos-FPV-Camera-p-1088368.html

[DONATIONS]
If you find that the item improve your daily life, consider supporting the designer by sending a tip.
Click "TIP DESIGNER" here.

[UPDATES]
2017-01-11: New improved version released, Angles 0deg, 10deg and 20deg available.
2017-01-10: Release of first version.