Yoda USB powered lamp / nightlight "Gloda"

Hello guys and girls.
This is a light up Yoda lamp or night light it uses my USB light which you need to print and download from
http://www.thingiverse.com/thing:2047092
Follow the instructions there to create the light.
I used a green led for mine and a 200 ohm resistor.

If you don't have the skills needed to make the light I also designed it to work with one of these candles from ebay.
http://www.ebay.com.au/itm/New-10-20-30-PCS-LED-WEDDING-TEA-LIGHT-TEALIGHT-CANDLE-FLICKERING-FLAMELESS/201168843821?_trksid=p2045573.c100033.m2042&_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D39923%26meid%3D53157d5a5e5e44468c973e67e06549d3%26pid%3D100033%26rk%3D3%26rkt%3D8%26sd%3D172158427096

I recommend working out the print settings yourself,
I created several using various techniques with simplify 3D including vase mode and 0% infill with 3 outer perimeters. Both work well but vase mode is a little tricky and leaves the part very fragile, as such I recommend using 0% infill and at least 3 outer shells.

Revision
I added the file Yoda Ebay candle.stl as there seems to be some slight deviation with the size of the Ebay candles and some may be a little tight. I made it 1mm bigger to be sure.

Disclaimer
I did not create the Yoda texture, I simply remodeled it from Adam Beamish's original model.