Printer electronic and psu enclosure

This is an enclosure for printer electronics. It contains a smoothieboard (ramps will fit as well), a voltage regulator, a Raspberry, a LCD touch screen display (TFT32). It has also a Fan to cool down all the stuff, but it may be not be required given on mine the PSU had already a Fan integrated.
The sides, top and bottom are CNC cut in 1.5mm fiberglass. If you don't have CNC, then there is STL that can be printed , but but be warned that the longuest lenght is 33.3cm so you need a big printer.

Screw: M3x8 or M3x6 , no need for nuts, the screw fit well into the PLA.

Components links:

• PSU: https://www.amazon.fr/gp/product/B00JVFWVDO/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 (need to be grounded)
• power switch: https://fr.aliexpress.com/item/HIGH-QUALITY-Red-Light-Power-Rocker-Switch-Fused-IEC-320-C14-Inlet-Power-Socket-Fuse-Switch/32639960373.html?spm=2114.13010608.0.0.QpQcLT
• LCD TFT32 for mks sbase: http://www.ebay.com/itm/311719539097?_trksid=p2057872.m2749.l2648&ssPageName=STRK%3AMEBIDX%3AIT
• mkssbase
• Raspberry
• volage regulator to 5V