January 23, 2017
Description
A 1:4 scale model of the Apple Lisa (original/Lisa 1 and Lisa 2/Macintosh XL).
The case is built to be used with a Raspberry Pi model 2, and includes mounting points for the Pi and a 2.5'' LCD display, such as this one from Adafruit: https://www.adafruit.com/products/2298. A GPIO cable is required to connect the Pi and display.
The bottom Twiggy drive in the Lisa 1, and the single floppy slot on the Lisa 2 also has a mounting point for an SD card reader, or extension cable such as this one:
http://www.amazon.com/Manufacture-Sdhc-micro-Reader-Extension-Cable/dp/B0085GGO92
The parts of the case are 6 separate pieces that should snap together, though a small amount of glue at the corners will ensure that the model holds together during handling.
To purchase a fully assembled and painted case, with LCD and cables already installed, my etsy store: https://www.etsy.com/listing/250827647
License:
Creative Commons - Attribution
option8
![Cable Repair and Protect for iPhone and Samsung [lightning+usbc] preview image](https://wsrv.3dprinterfiles.com/?url=https://media.printables.com/media/prints/590112/images/4827822_b916b887-676b-4723-b0c9-90881c40951e_31bb8182-a7ba-4745-adfd-b9d44646baac/thumbs/cover/320x240/jpeg/195cfe9b-40fc-4570-b695-c540798fc979.jpeg&w=640&h=640&output=webp&q=100&n=40&default=https://media.printables.com/media/prints/590112/images/4827822_b916b887-676b-4723-b0c9-90881c40951e_31bb8182-a7ba-4745-adfd-b9d44646baac/195cfe9b-40fc-4570-b695-c540798fc979.jpeg "Cable Repair and Protect for iPhone and Samsung [lightning+usbc] preview image")
