Anet A8 Front Fan Sensor Mount 18 mm

This bracket allows the sensor to be mounted to the front fan with the sensor in the same location as Leo_N's bracket (http://www.thingiverse.com/thing:1907394), so that one doesn't need to update their off-sets. I was having to re-calibrate the sensor's Z offset each time I had to remove the extruder fan to clear a clog (without removing the extruder itself).

Offsets for 18mm sensor are still:

define X_PROBE_OFFSET_FROM_EXTRUDER -26 // X offset: -left +right [of the nozzle]
define Y_PROBE_OFFSET_FROM_EXTRUDER -40 // Y offset: -front +behind [the nozzle]
define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle]

define LEFT_PROBE_BED_POSITION 25
define RIGHT_PROBE_BED_POSITION 194
define BACK_PROBE_BED_POSITION 170
define FRONT_PROBE_BED_POSITION 20

For a 12mm version, see: http://www.thingiverse.com/thing:2295883
For a screw mounted sensor version (Anet A8 Tronyx XY-08N Bed Level bracket), see: https://www.thingiverse.com/thing:2506274

The wiring schematic and parts list for my sensor: https://www.thingiverse.com/thing:2758533