Prusa i3 MK2/S/3 LED Panel Light ClipOn Upgrade

IMPORTANT: Get the latest updates for this model here on PrusaPrinters.
In 2021, all updates and uploads of new models were moved to PrusaPrinters, of course still free and under the same conditions... :)

eBay has some great cheap 12V 4W LED panels for car interior lights (Search: 48 SMD COB Panel LED T10 Car 12V) - Why not make a couple of lamps for my Prusa 3D printer?

I decided to make a design based on the earlier designed ClipOn system for the main Prusa frame.
As the LED panel get very hot when used directly on 12V, there have to be a good ventilation grid for cooling.

Design challenge:

• All plastic and easy to print (no screws, etc...)
• As few parts as possible
• Little to no post-processing of finished printed parts (edges, holes, etc.)
• Wires should be integrated in the solution
• Light should be adjustable (direction)

If you like this design, you may also like:

• Prusa i3 MK2/S/3 Filament Guide ClipOn
• Prusa i3 MK2/S/3 Filament Spool Holder ClipOn

Note for MK3: MK3 uses 24V, therefore you have to use LED panels for 24V or connect two lamps with 12V LED panels in series.

Please show your great makings of this thing, leave a comment and/or a tip :-)