OpenLock 5.0 Tudor Shutters and Raw Window Styles

A frame that fits within the Tudor Wall (only "A" Style) Windows, to convert to a shuttered window.
Pins- Definition is that there are holes for pins that may allow real time open/close option, V4 has removed the hole through the shutters and the shutter frame to allow pin vise to "bite".
Push-Definition is that there is a modeled pin on the shutter to push-fit into the shutter frame. V4 has a longer modeled pin.

V4 Frame is the same for each type of shutter pin or push.

Added V1 shutters with angled brace. Also included doubled/mirrored to print a "set". (original shutters do not need to be mirrored to print like the v2 version had to) Both pin and push models.
Have not printed the v3 improvements as of 03/27/17

Still is a finicky model/feature. It will take some clean up and modeling skill to make work. I had to trim the frame (minor print defects) because of the print bed thickness of the print. Also, had to drill out the holes with a pin vise. Used some extruded filament scraps as pins in the hinges. Not sure if the frames would work if the shutters were glued in the shut position to the frame as flexing the shutter frame allowed it to fit snug within the window frame. The frames should work if the shutters were glued in the full open or partially open position.
03/23/17 Added a different style of shutter without pins. Thicker braces on back for definition. Concept: shutter will push into frame "hinge". Also added shutter frame, that is a hair less wide to fit into the opening. Need to print to verify best fit, but if it works will relieve some model fiddling.
03/27/17 Fixed models to be less model skill required. Added angled brace shutters in pin and push fit styles. Also included the double shutter set of mirrored shutters of the braces.
03/28/17 Back to original layout, but brace and fixed shutter frame. Back to being fiddly, but that works best at the moment.

Works with OpenLock 5.0 Tudor Window Wall A -Open http://www.thingiverse.com/thing:2188154
OpenLock 5.0 Tudor Wall Window -Diamond Pane ("A" Wall Window size)
http://www.thingiverse.com/thing:2193667
OpenLock 5.0 Tudor Wall Window -Lattice Pane ("A" Wall Window size)
http://www.thingiverse.com/thing:2193638
OpenLock 5.0 Tudor Wall Window -Circle Pane ("A" Wall Window size)
http://www.thingiverse.com/thing:2193602
OpenLock 5.0 Tudor Wall Window -Full Pane ("A" Wall Window size as shown in the pictures)
http://www.thingiverse.com/thing:2188178