Spacer Block for use with 2040 corner bracket - Tevo Black Widow

This is a spacer block to help secure the base of a Tevo Black Widow printer to your bench-top. The block is designed to used with a "2040 corner bracket". The bracket can be found here: https://www.aliexpress.com/item/2040-corner-bracket-right-angle-connection-90-degrees-bracket-for-european-standard-20-series-slot-5mm/32707756173.html

This same 2040 bracket is also used to stiffen the frame if you choose. they are dirt cheap so just buy a bulk lot. I bought 20x for every corner of the BW printer.

See photos to for typical mounting set ups. Can be adapted for use on other 8020 or 8040 extrusion frames or similar. 8x 2040 corner brackets are used to attach the printer to the bench-top along with 8x spacer blocks. The optimal height of the blocks are set to 13mm, but can be adjusted in your slicer software.

Please check out my other thingis!