Motorbike fun design PART 3

Part 3 I have done the engine, transmission, belt drive and pulley's. Exhausts and peddles.
All parts have been printed at 1.5 scale of the size of the stl's
Most things were printed at 15% but the footbrake and change I did a 65% or so.

Still to do is clutch and handbrake, belt drive cover, mock up for chain to rear wheel and carburettor, also the oil tank. No wires are see I will just pretend they are all hidden.
Then I think it will be done. Hope people are enjoying it I will get the rest done as soon as I can. I will see how I go.

enjoy
Pete

UP DATE- I have changed the large pulley and part of the trans I have up loaded the new STL's so if you are just down loading it its all good.
If you use the old on just cut off 6mm on the large pulley and 9mm off the attachment ot the trans. I also had put the pulley's and belt around the wrong way do as the picture is now