April 11, 2017
Description
The intent of this remix was to provide an enclosure for the following stacked components:
Adafruit Feather 32u4 Basic Proto
FeatherWing Proto
Adafruit 15x7 CharliePlex LED Matrix FeatherWing
Adafruit Sensiron SHT31-D Temperature & Humidity Sensor
Where the Feather was programmed to display the current temperature, updated every 5 seconds.
The basic case and wing top of the Adafruit Feather Box Enclosure were the initial source for this enclosure.
This remix involved narrowing and slightly lengthening the enclosure and reducing the wing top cutout to only display the LEDs of a CharliePlex FeatherWing. A few other modifications were also made as some options available in the basic case were not needed.
Many thanks to Adafruit for providing the Fusion 360 Archive file (Feather Box V2.f3z), the groundwork for this project!
Note that the photographs provided of the CharliePlex FeatherWing, when on, do not accurately reflect the display due to lighting issues when photographing light sources.
License:
Creative Commons - Attribution
Protopix
