RIS/Picatinny riser (metric parts)

STL FILES can be found here: https://www.prusaprinters.org/prints/137915-rispicatinny-riser-metric-parts-airsoft

Why

I have T1-style red dot that sits very low on the rails of my airsoft replica's. This print raises your sight by ~32mm which is perfect if you're using goggles/helmet/mesh covers.

Features

• Works on standard 21mm Picatinny/RIS rail
• Uses metric nuts and bolts
• Wisdom tooth not included

Instructions

• Print it in PETG for a stronger part
• Uses M3 nut and M3x30mm (or longer) bolt
• Use supports and print it with the front or backside on the build plate.

Open Source

As always the original design file (fusion360) is included, so feel free to improve it (or learn from it)!