GEEETech i3X (PRINTED version): X-Motor End

Hi,
in the GEEETech Acrylic Prusa I3 pro series the X version is the entry level one, with acrylic idler where the B and C version now have the metal ones… but before they had printed ones!
Unfortunately the X version have 27mm distance between bars where B and C have 22mm, so owner of X cannot buy the Metal upgrade kit!
For this reason I’ve publish the X-2-B/C Upgrade Kit in order to enable upgrade of i3X printer!
Most component of my “(PRINTED version)” customization work on this X-2-B/C, but not the X Motor…
… so this is the X Motor Idler component of my new customization adapted to X-2-B/C!
As you can see from attached picture the contacts are decoupled on bottom of this component, so you can easy install!
You can see in Schema all components you need, and all the cables are 90cm length to avoid any complexity during installation

In the schema images you can see how all this cable are connected.

PLEASE PAY ATTENTION: the decouple is NOT SO EASY to create!
You must be good with a soldering iron!!!

As usual in all my design I’ve split all in order to have an easy print of each, and also an easy mounting after print!

IF YOU “FALL IN LOVE” OF THIS DESIGN, PLEASE, REMEMBER THAT IT TAKE TIME TO BE CREATED, DESIGNED AND SHARED… SO “MAYBE” YOU CAN USE THE “TIP DESIGNED” BUTTON ON MY PROFILE!