Taper Attachment for Hardinge TL10 lathe

This is all three parts for making a taper attachment for a Hardinge TL10 lathe. I made these models to make sure I had all the dimensions right!
The slider and slide bar match the stock Hardinge parts, and can be made from Ken's castings. The mount does not match either type of HLV castings, so I will be laying out DXF cutting files for the parts. The mount does not cover all of the machined mounting area; on my lathe I have a magnetic scale mounted on the top edge of this area. You may want to expand the mounting area if you don't have a scale.

Please keep in mind; these parts WILL NOT be strong enough for actual operation on a lathe!