Bat Signal with Original bat logo and Dark Knight logo - for 1W or 3W "Star" type LED

Print and assemble parts. Base and turret first, then center glues to the turret once assembled. Then print Housing, wire in LED making sure to run wiring through the base, turret and cover. Glue cover onto housing and snap housing into the turret. I have 2 different bat signals, the dark knight and original. These simply snap onto the front of the housing depending on which symbol you want.

Any "Star" styled LED will work like the one in the picture. There is a sunken area where the star fits and you simply heat stake the LED into place. (melt the plastic with solder tool and smash it over the LED sides) There are holes to run wires. The light swivels and pans up and down. I wired mine to work on 5v USB, so I can plug it into any USB port to power it. wire it however you wish, just be certain not to use a too powerful LED that gets hot and causes a hazard.

It works great and casts a nice 8 foot signal on the ceiling. Signal is sharper and more crisp the closer (and smaller) the light is from surface. Enjoy!