January 13, 2014
Description
Just like the original but this one has two mounting holes for the revision B and onwards Raspberry Pi boards. The holes are 2.8mm in diameter which is sufficient for a M3 (3mm) bolt to self-tap a thread. I used two M3x8 hex headed bolts.
The holes on the Raspberry Pi are 2.9mm in diameter, I drilled mine out to 3mm carefully with a drill bit.
License:
Creative Commons - Attribution
RobertHunt
![NAS ITX PC Case with stackable expansions [MODCASE MASS] preview image](https://wsrv.3dprinterfiles.com/?url=https://media.printables.com/media/prints/590711/images/5398476_0c00c6d9-fdbe-4607-87dd-43629c8d4a8e_5e31701b-0df6-4979-ab25-d1b7d3dc16b8/thumbs/cover/320x240/jpg/212.jpg&w=640&h=640&output=webp&q=100&n=40&default=https://media.printables.com/media/prints/590711/images/5398476_0c00c6d9-fdbe-4607-87dd-43629c8d4a8e_5e31701b-0df6-4979-ab25-d1b7d3dc16b8/212.jpg "NAS ITX PC Case with stackable expansions [MODCASE MASS] preview image")
