Runcam Mini Lens cover and Micro mount

This is a copy mount of the new Runcam micro for the Runcam mini. the new Runcam micro seems to be the same camera as the mini but with out an external case, instead just a lens mount and pivot holes. The runcam Micro has a 1/3 2.1mm lens with a M8 thread and seems to be a big shorter. i have a file meant for a M8 lens if you can source one but this is mainly for the original runcam 1/3 M12 lens.

I have also added very basic Lens covers that if you do not want a way to mount the camera or you just want to reduce size further this lens cover will pop over the sensor and hold the lens much like cheap CMOS cameras.

I hope this will work well with the Rotorx Atom and other mini quads.

All lens holes have been sized to tap the threads your self as 3d printing such small pitch threads will not work. because of this i would print with 80-100% infill and 4-6 layer walls.