Summary

The QX95 is a brilliant little thing but I bent my antenna a couple times in rough landings so started to look for a guard until i get better. Couldn't find one i liked enough so designed a new one.
Could be a couple mm-s taller (although fits as it is) and i designed it to be slightly asymmetric to fit my slightly bent antenna :) So if you need a straight version just give me a shout and i'll upload one.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/0Knff9bsnN8

Print Settings

Printer Brand:

Prusa

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Prusa Clone</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>30%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I printed it from PET-G but should be fine from ABS or PLA too; due to the small size infill is optional.<br>Designed it to print without support; it has quite steep overhangs so expect a bit of drooping on the edge but it's fine, just cut it off after printing.</p></div>

QX95 antenna guard

QX95 antenna guard

Related Models