Summary

This is a remix of a mod by James Sprecker on the FolgerTech 3D Printers Facebook group.

This bracket was designed to use a 10-32 screw and nut. It can be modified to accept a 5M and TNut by enlarging the slot just slightly.

The nice thing about this mod that James worked out, is that you don't have to trap another belt around the lead screws. And, it uses the existing frame mounting, just replacing the M5x10 screws with M5x16.

NOTE: The length of GT2 belt that I used, as pictured, is 696mm, but I have tried a 760mm and the slot in the bracket is long enough to work with that length.

Print Settings

Printer:

Monoprice Select Mini

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.175</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>50%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Printed in Filament Innovations Carbon Fiber X</p></div>

FT-5 Z Sync Mod

FT-5 Z Sync Mod

Related Models