May 5, 2017
Description
Originally a nice design. However, I didn't like the cabling and I wanted the PSU to be part of the lamp.
A small toggle switch serves as an on-off-switch, PSU is a 40mmx40mm 6W LED supply module. For the cabling I used wires for model trains. LED stripe is a 60LED/m neutral white.
UPDATE:
The PSU i used:
http://www.ebay.de/itm/LED-TRAFO-12V-DC-6W-max-Transformator-Treiber-Netzteil-0-5A-MR16-MR11-G4-GU5-3-/111773407165
Stem and base are printed using a faux-wood PLA at 0.2mm, 30%. Shade uses PETG with 0.15mm, 100%.
Propped up this thing in Tinkercad. However, I am not quite satisfied with the base since Tinkercad doesnt allow that many steps for a torus compared to a cylinder (24 instead of 64). This gives the rim of the base a somewhat uneven (steppy) finish which I do not like that much.
To be able to get more light out of it I modified Bernbout's two LED stripe-shade for my cabling. Did not print this yet though.
License:
Creative Commons - Attribution - Non-Commercial - Share Alike
7,878
rumbero71
