TEVO Little Monster Improved Screen (MKS TFT28 LCD)

Finally, somewhere to put those blindingly bright LEDs. I also disliked the original one as its a touch screen, so why have the panel dangling around?

This one is solidly fixed right to the edge of the top panel. It sits flush to the edge so if you want to build an enclosure the screen can be easily accessible from the outside.

The LEDs are diffused and to a degree lights up the honeycomb infill which looks pretty cool. So I'd recommend printing in something translucent or white. There are two clips on the inside that hold the LEDs,

I recommend printing this in ABS.

You will need:
2 x M5 x 10mm screws (Original 2 screws to hold LCD panel, I THINK it is M5)
6 x M3 nuts
6 x M3 x 16mm or longer Countersunk

The way I put it together was first attaching the back panel to the frame mount. Passing through the cables and attaching it to the LCD screen. Then closing it up pulling away the cables from the top of the printer. Then screw in the 4 screws around the LCD panel (on the front mount).