Amiga CDTV Gotek USB disk drive emulator base

** UPDATE: check for schematics and pinouts @ new pictures **

This bundle consists of a base and a front for the Amiga CDTV computer which makes it possible to place the well known Gotek USB disk drive emulators.

Important: It's necessary to desolder the USB port, buttons, leds and one capacitor before placement.
After placement all items can be soldered back, keep an eye on the capacitor location and use some kind of isolation between the gotek-board and the CDTV case. (I've used kapton tape)

Update: two versions of the front part have been uploaded.

1. The flat front can be used without modification needed to the CDTV case.
2. The front with the recessed line needs a small cutout in the bottom plastic (see last picture red rectangle area)

Update 11-04-2018: Added front with support for 0.91" OLED display which is supported by the FlashFloppy firmware.
Note: this is experimental, haven't printed and test fitted it