TEVO Little Monster - Enclosure

Here's my enclosure kit for TEVO Little Monster

You need 2.5mm-thick-polycarbolate panels (such as plexyglass) in which you must cut :

6 x (1000 x 66mm)
2 x (1000 x 159mm)
2 x (1000 x 319mm)

Note : You can also use from 2.4 to 2.6mm thick panels

You need to print :

• min 6 x Integrator4door
• min 6 x Hinge
• min 12 x Integrator
• min 12 x Corners

I've added gauges to help you drilling holes at the correct position.

Hardware needed (per printed piece) :

#####Hinges :

• 6 x M3x30mm bolts
• 4 x M4x12mm bolts
• 4 x M4 nuts
• 2 x M4 washers (0.8 to 1mm thick)

#####Corners :

• 4 x M4x12mm bolts
• 4 x M4 nuts

#####Integrator

• 2 x M4x12mm bolts
• 2 x M4 nuts

#####Integrator4Door

• 4 x M4x12mm bolts
• 2 x M4 nuts
• 2 x M4 T-nuts

#####Door Handles

• 4 x M4x12mm bolts
• 2 x M4 nuts
• 4 Cylinder Magnets (3mm diameter, 5mm length)

2018-03-07 : Added door handle with holes for small magnets.
2018-05-25 : Added a zip package for 3mm-thick panels
2018-09-21 - Added a zip package for 4mm-thick panels
2019-10-30 - Added STEP versions for 3 and 4mm