RC Truck body

Originally from 3rdaxis but in one part. I spent ages separating it into parts and making it easier to print, then modified tahuastvedt's Ursa monster truck running gear to fit.

31-05-17
Looks like I'm fixing it. Added front 126mm with no grill or bumper, removed indicator lights from the sides, way easier that fixing them.

I'll probably remove the back part cab off the deck or maybe just the little windows

Have printed the bonnet and it seemed ok, just a bit thin. The grill and bumper are made of about 8 parts all just jammed together.

24/02/18
Most of the body has been separated into its parts now, I'll scale them to 80% and have to get some PLA as ABS is warping to much on the thin parts.

3/04/18
Pretty much finished, just needs the grill/bumper sorted and hinges for the bonnet/doors, maybe these https://www.thingiverse.com/DarkDragonWing/designs/page:1. Probability have an update of files in next day or so.

Long wheel base wellside added, +20mm approx
ws pt1 lwb, ws pt2 lwb and ws pt3 lwb files
Made to fit my Land Rover chassis https://www.thingiverse.com/thing:2618617
Floor pan coming soonish.

14/04/18
Chassis needed modifying to fit, so its a little different to the Land Rover one.
Added chassis frame and floor pan, floor pan needs to be shortend1-2mm.
Back tray is a bit ugly, needs some redesigning so it prints better.
Door and bonnet hinges made and bonnet is done, just need to find them.
Door catches are ugly prolly make new smaller ones.
Missing back part of chassis is the same as my Range Rover, need to find that as well.

4/19/18
Grill/bumper updated. Made easier to print and fit together properly and also were the wrong scale.
shortened floor pan 1mm

29/04/18
Grill back changed to make headlights fit. Headlight surrounds still need work.
Added Shorter frame back end to fit body.

22/04/18
Dash and steering wheel with servo arm added. mines just glued in but will sort it to bolt to the floor pan.

30/04/18
New dash and magnet body mounts added

5/19/18
New headlight and spotlight, hole for led but it might get to hot and melt.

Added some pic's of the body on the chassis from my Monaro, it fits just needs the mounts modified.
https://www.thingiverse.com/thing:2931131

Added a pic of back trays both short and long wheel base, parts can be mixed to make different wheel bases and tray lengths.

27/8/18 Added taillights (untested but should be ok)

6/11/18
New dash with front floor and steering wheel servo mount. Not printed yet but should be ok.