Lipstick/hardware case with 12+1 slots V2

Upgraded version of my lipstick case/display design: smaller outer dimensions, but same capacity
Outer dimensions (closed): 144mm x 136mm x 105mm (L x W x H)
Slots will elevate as you open te box
The lid locks itself in position once fully opened or closed: to close it, you need to lift the hinge
Each of the files needs to be printed only once
PLA works just fine
Highly reconmend printing Assembly03_-_Box13v2-1.STL with layer height <0.100mm, for the other parts the resolution doesn't matter as much
Make sure to sand the rails, it really matters
Applying lubricant to the rails is optional
Welding the hinge pins to the lid is optional
Reconmend printing the gears with >90% infill
Disclaimer: I have not yet figured out exactly in which order to assemble the racks and pinions