Summary

The Zenfone 2 has Dual SIM and lately the SIM in Slot 1 would move out and disconnect during normal use. So I designed this to add a bit of tension to both SIM cards

For Single SIM I scaled up the Model:
X axis stays the same
Y axis +1mm (+6%)
Z axis + 0,5mm (+50%)

I did not test the Single Slot version, if it's too short increase the Y axis by another 0.5mm ( ~3%)
I increased the thickness so the tensioner shouldn't be able to move into the unused SIM Slot.

Print Settings

Printer:

Anet A8

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>10</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I printed it with wall thickness (side, bottom, top) at 1,2mm but the model itself is just 1mm thick, so it will print solid.</p></div>

Zenfone 2 Sim tensioner

Zenfone 2 Sim tensioner

Related Models