LED Matrix Prototyping Mount

This is a simple prototyping mount to hold two SparkFun LED Matrix breakout boards. I'm working on a larger LED Matrix setup, but wanted to do some software prototyping using two of the MAX7219 LED controller ICs. Here is the parts list and purchase links:

Hardware:
(1) M2.5 Tap
(8) M2.5 x 5mm Machine Screws

Electrical:
(2) SparkFun LED Matrix Kit
(4) 0.1" Crimp Connector Housing 1x5
(15) Female Crimp Pins
(5) Male Crimp Pins
(1) Crimping Tool
(N/A) Wire and Wire Strippers
(N/A) Soldering Iron

NOTE: You will also need a microcontroller (or anything with Digital Input/Output pins) to interface with the LED Matrix controller ICs. I personally have been using an Arduino.