Tronxy X1 radial fan mount and nozzle.

Update 2: I had too much trouble with hotend cooling with this bundle. I have moved on to an alternate configuration which is working weel for me. I no longer recommend this bundle.

This is just a bundling of a 50mm radial fan mount and a nozzle that worked together for me on the tronxy x1. It's a simple mount without replacing all the bits. note: I made none of this. All credit goes to:

it's the mount from FabianFriethjoph https://www.thingiverse.com/thing:2330698/#files

and the nozzle from louiscooper https://www.thingiverse.com/thing:2184575

Also I had the idea for a bundled remix thing, and wanted to see if thingiverse supported dual remix.

Update:
my experience with this combo so far is that the part cooling fan and duct manage to cool my hotend too much. when the fan turns on high the temp drops by 15° C and struggles to come back up. on the tronxy x1 with dead-time based heat management. I switched to PID management and tuned PID with the fan on high, this worked but I think is a bit of a hack work around. and the PID heat management oscillates when the fan is not on high. an alternative approach is to keep the fan speed low in your slicer.

I will probably try other arrangements next.