M450 -- F450 to Mavic

Disclaimer: Files are shared for inspiration, use them at your own risk.

Target of project

TL;DR: make F450 portable
I have F450, but it is inconvenient to travel with it. When mavic came out, wow what a great design. It should be possible to clone the design with 3d printing.
Even better, there are design for 3d printing. I wanted to convert my F450 to M450 (mavic in 450 size).

• reuse components from F450

However, I had to modify original design to fit components of F450, and also had my own ideas:

• try to keep clean (at least from outside)
• try to have few parts to print (using support if necessary, that's the job of slicer, not designer) (potentially saving weight)

My setup, other hardware

• F450 combo kit (NAZA-M-v2 + E305)
• Folding propeller
  • Gemfan Self Tightening Folding Propeller Hub For 6mm Thread (CW/CCW)
  • Gemfan Faltpropellers 9.4x5 Green (CW / CCW) (2 Stück)
  • Gemfan Faltpropellers 9.4x5 Orange (CW / CCW) (2 Stück)
• Spring: HPI Feder 10 x 10 x 0.9mm 4.5 Windungen (4 St) Switch / H38490
• 4 X M3 screws
• Walkera RX705A
• 808 keychain camera
• Aomway Micro V2 200mW 32ch 5.8GHz Video Transmitter Upgrade Version inc Race Channels (6~28V)
• DJI IOSD mini
• MultiStar 3S 10C 5200mAh, and other similiar size lipo batteries

weight

• frame: ~350g (heavier than F450 frame which is ~280g)
• total: ~828g

TODO: list of files

TODO: known issues