- wanted to create a easy method of color mixing through multiple parts
- based on my trusted D13mm stainless steel balls
- you will need 6x "clamp", 1x "mainbody", 1x "bearingbody" for the spinner
- parts will need to be glued together
- needs 1x 608 skate ball bearing and 6x balls, balls snap in place
- caps will need some glue
- model units are [mm]
- added stls with "_inch" for 1/2" (12.7mm) balls (untested)
License:
Creative Commons - Attribution - Non-Commercial
87squirrels
