June 23, 2017
Description
Facebook Group
https://www.facebook.com/groups/MakingStuffAwesome/
Why you should support me on Patreon
https://www.patreon.com/Ultrasonic2
These are the files for the updated Stryfe stock (Version 3) i made version 2. I have changed everything but the major improvements are improved stock sliding mechanism. I Also added the "Nut" thing at the base of "AR15-reciver_extension" to make it look better and to make it a bit longer (10mm). Also i have changed the stock to Stryfe mounting system to be a "crush" type.
AR15-reciver_extension.STL
The crush slot for the mounting bolt has a 45 degree taper so you can print this vertically and enable supports from the base and as longer as your angle is greater than 45 then it wont support in that gap which could be hard to get out if it did print in there. The bolt is a
M4 45mm with nut.
After printing the above print
Normal_Size_Test.STL This is a profile of the stock you can make this first to see if it fits AR15-reciver_extension.STL... if not print Normal_Size_Test_025_over_size.STL and try that one...
After that print the right size Stock
AR15-main_stock.STL/AR15-main_stock_025_oversize_.STL
I have made too version because everyone hates making things that don't fit. So now you have two options.. FYI i printed AR15-main_stock.STL
You can then print the latch AR15-stock_latch.STL
If you want you can print AR15-stock_swivel.STL and AR15-stock_swivel_screw.STL for some more eye candy. However i haven't printed these yet and it's unlikely they will be able to support any weight.. Im assuming you'll glue the screw in.
The Stock to receiver still needs more fin tuning in bolt length and Spring.
I believe i used a M4 "Flat" head screw driver screw that was about 35mm long you then print MD_m4_pin_lock.STL and slide it over the bolt. I was not sure what spring would be gets so i bought a range of them but i still feel they are TO weak. I used a 50mm "wire 0.4mm outer diameter 7mm Stainless Steel Small spot compression" i would go for some thing shorter but with a significant increase in wire diameter next time.. ID can be 4mm and OD can be 8mm, well that is the space provided in not suggesting a spring of that dimensions. I would like to hear back form the community on a better spring weight and bolt length. The nut NEEDS to be a M4 LOCK NUT.. not what i used in my pic/video
m4 Lock Nut
http://s.click.aliexpress.com/e/UjUfEee
The Licence you agree to when downloading this thing prevents you from making a profit from MY thing. This means you CAN NOT sell this or any of my other things on places like Ebay, Facebook, Forums or Etsy. You also may Not sell My parts as Part of a complete blaster. I don't profit from putting this thing us as a Free download and therefore no one else should too.
Based on this by "Les.T." But SOOO much has been changed.
https://grabcad.com/library/assembled-m4--1
Printed on Tronxy X3A 3D Printer
Update 03/Sep/2017
Uploaded a 2 part receiver tube for people who's printers can't print so high to print the original one... It's meant glued together (which is what was requested)
License:
Creative Commons - Attribution - Non-Commercial - Share Alike
3,503
Ultrasonic2
