Filament multi-reel Clips for 1.75mm

After a lot of use of the original design, I found that the filament did not click into place well enough, and also that the filament would catch against the clip when unreeling.

This new design fixes the tactile feel when parking the filament and you do not need to remove the clip from the reel while using the filament.

The clips were designed for the Octave multi-colour filament reel. The smaller one is for the 2.6mm thick wall without any lip, and the larger one for the side wall with 5mm lip.

I have found that the larger clip also works well on some other makes of reel.