RC-Box für Wilesco-Dampfwalze oder Dampftraktor

When I got my birthday peresent, I was happy! A real working rc-steamengine! But close afterwards I found out, it just didn´t work so well with the enclosed rc-system. So I designed my own RC-Box. The Servo Mounting is made to fit a little 9g Servo. I used a standard 4x AAA-Battery-Box to feed the power and a small receiver to send the signals to the steering-servo, the valve-steering servo and the forward-rewerse-servo.

I hope this actually helps some others, who want to controll their wilesco steam-tracktor... :-)
IF you print this,.. please don´t forget to leave a picture here... :-))

And of course,.. use it at your own risk, and don´t forget, PLA and ABS don´t welcome heat, so be carefull while inserting the burner below the boiler... or use a bras-plate (i.e. the original one from Wilesco) to protect the rc-Box from below :-)