Stryfe Wire Channel (with and without Volt Meter Mount)

This is an upgraded wire channel for the Nerf Stryfe. It adds 5mm of space for wire so you can fit 16awg wire and volt meter wire. There are 2 versions of this design, with Volt Meter mount and without, so you can use 16awg wire without having the volt meter mount in the way if you're rather go that route. It was designed to take M2 *6mm screws and this voltage meter: http://foamblastshop.com/product/volt-meter/ Wire from voltage meter is long enough to reach the jam door switch. Make sure you use the 3 pin switch from the stock loom and test which pins work for the application. The 2 pin switches will not work.

This was designed for my printer and some of the holes might be too tight or loose depending on your printer's accuracy. I have included the STEP file for both models so you can change them for personal use.

Legal Mumbo Jumbo: Please observe the non-commercial and non-derivative licenses. I reserve the right to not enforce the license as I see fit. I will not enforce the non-commercial clause of the license in instances where an individual pays a third party to print this item through a print service for personal use (ex. Using 3d Hubs). Any individual or company who has not licensed this design through me for commercial use may only receive compensation for three of these items annually. I will not enforce the non-commercial clause of the license in instance where an individual sells a blaster that has this item on it as long as the individual does not sell more than three blasters a year with this item installed or bundled with the sale. I reserve the right to sell this item myself or license to 3rd party companies interested in selling it (contact me if you do).