Electronicbox for Bladeless Fan Version 2 by Helix3D

Hi,

i build up the Bladeless fan and noticed that there is no case for the electronics.

I made a housing for it and glued it with hot glue on the backside of the housing.

I also added a main switch to the case.

If you don´t want a switch use the closed box, also for those who don´t want a Logo on the cover use the closed one ;)

You need 4x M3 Nuts and M3x16 screws. I heated up the nuts with a lighter and "glued" it in the box. After you glued the electric box on the housing drill a hole in it.

I had to soldering the wires of the speed controller, because they were to short.

I fixed the cable from the power adapter with a cable tie.