KlooniTuubi

KlooniTuubi, clone of ProTube vr-rifle stock. Just get some chromed 12 mm (outer diameter) metal pipe and random nuts and bolt to make your own copy. Serious assembly required. Updated with more endurable Ver3 pieces. Would appreciate feedback.
Vive holders remixed from HTC Vive sniper rifle controller for "The Nest" by Croccy22.

You will need to print:
7 x Kiristin (Wingnuts) https://www.tinkercad.com/things/2OoZzQruxgR
2 x Kiinnike (Holder clamp) https://www.tinkercad.com/things/9YiSillEOyI
2 x Kloonikahva (Vive holder) https://www.tinkercad.com/things/6UI4R5empDD
3 x Jatkoristi (Hinge/Wingnut side) https://www.tinkercad.com/things/4f4piRHcArj
2 x Mutterijatko (Hinge/Hexnut side) https://www.tinkercad.com/things/lS6QN08yhLh
1 x Tuubiperä (Stock) https://www.tinkercad.com/things/i3NvyDivMSB
Optional:
1 x TuubiHihna (Sling connector) https://www.tinkercad.com/things/9YiSillEOyI

Update:
Non-tested Hinge thingy Kloonijatko ver.4. (https://www.tinkercad.com/things/1bH50QjgoAS) My printers powersupply is dead so i can't test this fine innovation (could be worse too). Print 2 of these babies to make a joint. Requires longer hex bolt.

And
7 x 6mm locknuts
7 x 6x30mm hex bolts
5 x 5mm locknuts
5 x 5x20mm pz2 bolts
200mm of 12mm copper pipe (chromed i suppose)
2 x 300mm of that same kind (100,200,300mm lenghts maybe?)

I'm sorry for your inconvenience but these were the bolts i had and made this for them.
Put it together like in the pics.

Ps. I hope those links to tinkercad work.

Disclaimer: ProTubeVR is design protected so this thingy is only available for personal use. http://www.wipo.int/haguebulletin/tran/details/4547501