Indicator Stand (uses 15 X 15 Extrusion)

This is a simple stand for a dial indicator or other measuring tool.

Everything is made for 15 X 15 extrusion, but could be scaled up.

I am using short pieces of 15 X 15 extrusion, so the pivot point holds well enough just using bolt pressure and friction. If you use longer pieces, or your indicator is heavy, you may have to modify the pivot.

The pivots and tool mount use captured nuts to provide adjustment pressure. The base uses nuts or t-nuts to hold the vertical piece.

All hardware is 3mm.

The files should be oriented for proper printing.

I used PETG, but that's just what I had loaded already.