GEEETech i3X (ACRYLIC version): Single Extruder FAN & LED (V2 with Radial FAN)

Hi,
following my implementation on GEEETech i3 Pro series I’ve given a look to the entry level one, the i3X with original acrylic idler!
Here the Extruder FAN & LED component of my customization in i3X version!
Here the Mono Extruder FAN & LED component of my new customization in his second iteration...
... compared to old one I’ve “just” completely redesign the cooling subsystem around brand new Radial Fan, with a beautiful circular system to cool down print area at 360° wide!
Two components, #1 and #5 are little different is you have the new, black, feeder compared if you have the metal one, I’ve design #1 and #5 for both, “B” are for Black feeder and “M” are for Metal feeder
As usual in all my design I’ve split all in order to have an easy print of each, and also an easy mounting, with glue, after print!

PAY ATTENTION: this customization is designed for the 38mm barrel, if you have the old 30mm barrel and this component cannot fit!

PS: after the installation of this customization is a good Idea to re-execute the PID Autotest… I’ve do two time, one with fan power off and one with fan power on, and both was really different from the same test executed just couple hours before!

IF YOU “FALL IN LOVE” OF THIS DESIGN, PLEASE, REMEMBER THAT IT TAKE TIME TO BE CREATED, DESIGNED AND SHARED… SO “MAYBE” YOU CAN USE THE “TIP DESIGNED” BUTTON ON MY PROFILE!