Garud-500 DIY Drone

Garud-500 is a fully 3D Print ready DIY Drone Design kit, specially developed for enthusiasts who dream to build their very first custom drone using 3D Printing. This Garud-500 can be 3D printed in commonly used PLA or ABS material and can be assembled without any hassles. The main frame board i.e. Top & Bottom Plate are designed to bear excessive forces during acrobatic flights while the arms are designed with landing gears to reduce additional connecting weight & prevent damage during landing.

Garud-500 can be 3d Printed with below print specifications:

• Layer Height: 200 - 300 Microns
• Infill: 30% (50% for more strength)
• Infill Pattern: Rectilinear
• Shell Thickness: 0.8mm - 1.2mm
• No Support required
• Rafts Enabled
• Temperature - 210 C PLA | 230 C ABS

BOM - (Choose your parts wisely)

• 4 x Arms (3D Printed)
• 1 x Top Plate (3D Printed)
• 1 x Bottom Plate (3D Printed)
• 16 x M5 Bolts 20mm length
• 16 x M5 Nuts
• 4 x Brushless Motors (2206 - 3600 Series | 700KV - 1200 KV)
• 4 x ESC’s (30A - 40A)
• 4 x Propellers (8045 | 9050 | 9060 | 1045 | 1050)
• 1 x Flight Controller (Naze 32 | Open CC3D | APM 2.7 | Pixhawk | DJI Naza V2)
• 1 x Lipo Battery (2200mah - 5000mah | 3S - 4S)
• 1 x Radio Controller (Taranis | Flysky Fs-i6)