DIN Raspberry Pi 3 Box

This is a box that can sit on a normal DIN rail. The Raspberry PI will be placed on it's long side standing. Then you can add whatever "extensions" you need. :) I'm using this in our Greenhouse. It's equipped with an Automation Hat and a Adafruit 16-Channel PWM / Servo HAT for the Raspberry PI 3. I'm also using two power step down modules. One for converting to 5v (for the PI, SPI, DHT and other low volt stuff) and one for converting to 12v (going though the relays). These are powered with an old Lenovo laptop adapter via the round power plug. Then I'm using the PiCam-Extension Base for this Pi Camera HDMI Cable Extension to be able to use a 5 meter HDMI cable fot the PI-Camera (so, yes the HDMI-port you see on the pictures are NOT for the screen). You will have to get a bit creative with "raisers" and spacers to get the HAT's to sit at different heights. I have included some M3 spacers and a M3 adapter that you can use to "prolong" M3 screws. Also the SketchUp files is now included. :)