Large Spool Hanger for Office Cubicle

I designed this to holder to work with the a large roll of High Temp Carbon Fiber PLA from 3DXTech. The spool dimensions are 12" outer diameter and 2" inner diameter.

The holder will hang on a cubicle wall that is no bigger than 2" thick. It will probably work on other things too.

This was modeled to print on a MakeIT Pro-L which has a large build volume (12"x10"x13"). You can scale the model down but it will decrease your distance away from the wall.

You will need to print two brackets and one rod.

Due to the length of filament freely suspending between the spool and printer, I needed to also design a loop to run the filament through to keep it from getting tangled in the bed.