GoPro Session Mount - Quadcopter Housing

This is a GoPro session case/mount for the 3 or 4, used for mounting to a quadcopter. It should be printed in flexible filament and is sized as such to be a tight fit. Print at 0.2 - 0.3mm layer height and about 25% infill and it should reduce the damage from impacts to your camera.

This design has apertures for accessing the side panel on the Session and an open back so that the camera can be changed out for charging etc. without the need for multiple housings. If you keep the infill fairly low you get soft/flexible edges that act as buffers in impacts.

When I printed it I added some hook and loop to the underside and use a battery strap to secure to the quadcopter.