iPhone 7 Plus Case 'Regular'

Today I’ve got something hot off the printer for all you iPhone 7 Plus owners out there. After designing a few iPhone 7 cases I had a number of requests to make the same cases for the iPhone 7 Plus. I've used the same minimalist look while still making it easily printable. It's designed to protrude slightly on the front. The back has openings for your camera and flash and protrudes just far enough to protect the camera bump from scrapes.

############ UPDATE 2: #############
There's now two versions of this case. The original design and a newer version that is 0.2mm longer in length and width. The slightly more loose version is denoted with 02mm in the name. My personal preference is for the original design but YMMV.

Here's a link to a video showcasing the original iPhone 7 bumper but since it's the same design on the sides but with a back and for the bigger iPhone 7 Plus I thought it would be useful to see:-
https://youtu.be/5wxyn2vClO0

In case you are after a case for the smaller iPhone 7 then you'll find them here:-
https://www.thingiverse.com/ScottyMakesStuff/designs

Fitting to your phone is easy, just put the end in first and then on a flat surface push down on the top until it snaps firmly on. An example of fitting is in the video at 2:40.

You can check out my other designs here:-
https://www.thingiverse.com/ScottyMakesStuff/designs