August 10, 2017
Description
I got myself a bigger heatbed (300 x 200) for my anet a8 and also redesigned the y-axis.
Most designs for the Y-axis holder need a lot of space and I cut it down a little, so it fits between the threaded rods of this ( https://www.thingiverse.com/thing:2477814 ).
V1: Had a brain fart here and thought the opening has to be 2x1.4mm. I forgot that the teeth are counted only once. So this should fit for belts that measure 2.8mm when taken double.
V2: Is for my 1.4mm thick belt which is 2.4mm when taken double (see pictures)
V3: Is like V2, but has the original hole spacing of the Anet A8 (12mm and 20mm).
V1 and V2 have a hole distance of 20mm (but only 2 holes with a 20mm distance, so it doesn't fit the original A8 carriage)
If you wonder why the print looks so rough, the glass wasn't clamped down properly, so that is could move a little. :(
License:
Creative Commons - Attribution - Non-Commercial - No Derivatives
JackTheQuila
