Minimalistic mATX PC build

This is a simple and minimalistic PC build I built.

What you ned:
Drive Mount
Powerbutton Mount
2x Spacer ATXMount-DriveMount 26mm
Spacer PCIPort-DriveMount 9mm
mATX mount Top
mATX mount Bottom
PS Mount
PS Mount Mainboard support
2x PS Mount PS-HDD Spacer

12x M3 Nuts and Screws in various lenghts (the longest is about 20mm)
4x HDD Mounting Screws
2x Powersupply Mounting Screws
Superglue
Tactile Switch as powerbutton

Tools:
Dremel or Hacksaw to cut the Screws in the right lenght
Soldering Iron

How to build:

The 2 mATX mounts where clicked together

PS Mount Mainboard support is mounted on the mainboard on the left under the varioud Ports (USB,...) with the Screw which also hold the mATX mount in place

On top of the mATX mount is screwd from top to bottom:
PS Mount
PS Mount PS-HDD Spacer
Drive Mount
Spacer ATXMount-DriveMount 26mm
mATX mount Bottom

The spacer "Spacer PCIPort-DriveMount 9mm" is glued in the middle of the 4 mounting Screws for the HDD-Drive on the "Drive Mount" in order to fill the gap between the "Drive Mount" and the PCI Ports on the Mainboard

Press fit the Tactile on its Mounting Part and screw it on of of the mounting Screws on the mainboard. Next you have to solder 2 wired to the coresponding pins on the tactile switch and the mainboard in order to turn on the computer.

I hope you enjoy the build!!!