Toy gun with magazine and pellets

=== December 15th === UPDATE: Version 4 - Assembly guide and firing system redesign. - Version 3 was a failure so straight to Version 4... - UPDATED ASSEMBLY GUIDE... FINALLY!!!! - No longer requires core steel rod - plunger now uses side rails to slide - Made Plunger Rod a lot stronger and articulated to absorb any flex there may be (to prevent breakage) - Various tolerance tweaks. === September 11th === V2.1 - changed the plunger and bullet loader carriage to stop bullets falling back into the mechanism once loaded - thanks to the guys that reported that issue. Updated magazine release for tolerances. Updated Slide for smoother motion and tolerance adjustment. Updated magazine body to make it latch into the gun easier than before. Updated magazine base for strength and general fit improvements. === September 9th === V2 now finished, Magazine and bullets added. Updated parts for the main frame, loader, barrel and grip covers to accommodate smoother firing function and add in the functional magazine catch/release-button. ======================================================================= This is a fully functional toy gun with magazine and bullets. The gun is simply something I've been wanting to design for some time and finally got the time to do! Load the 3d printed bullets into the magazine and fire away! The gun will be updated as improvements to the design are made. I don't anticipate much more will change between this version and subsequent versions although I will keep the list updated below. I will also upload a full build and assembly guide that I'm working on, soon. ENJOY!!!