DJI Spark Case

i wanted a small as possible case for my new spark and the remote... also fits the battery, cables, and extra propellers, and has some more space left. the case even fits in the bag supplied with the fly-more-kit.

use a piece of 1.75mm pla for the hinge. the round stuff on the bottom is to keep the corners from lifting, cut them off after printing.

the latch is printed flat and glued (i used epoxy) to the top-half. it's a separate piece, printed in another/optimal orientation, for extra strength.

The pads are from ikea. They should press down firmly on the remote and spark and keep them from moving when the case is closed.

Setting 'number of shells' to 2 is important for stability. Wall thickness is exactly 4 shells.

This is the second version of the case. Had to use another type of latches... In case these also dont hold, it's easy to cut them off and put some velcro straps around it.