Tronxy P802MA Belt Clamp / Tensioner / SC8UU Bushing

Edit 10October2017 The belt channel has been deepened by 4mm to better align the belt.

I designed this to lower the bottom half of the X axis belt in X Carriage type systems. Specifically, this was designed as a replacement for the one I originally designed for my creation here https://www.thingiverse.com/thing:2520345

My original design held the belt to high and caused binding issues. I've redesigned the clamp and combined it with a 2 piece bearing bushing that takes the place of the bottom SC8UU bushing. To use it you'll need 4 x M4 screws to secure the top and bottom half of the part.

This was designed to work with my Tronxy P802MA and I don't know if it will work with other models.