Summary

My mosqiuto net frames (cheap ones from the local hardware store "Bauhaus") were delivered with hooks for 13 mm and 23 mm.
Sadly my windows have 18 mm so I either had to live with the gap between frames and windows, bend the delivered ones or create perfect fitting spacers on my printer :-)
Size is 28 x 7 x 5 mm, holes are 3mm wide.
The design is pretty simple but works (for me) as intended.

Print Settings

Printer:

CTC Bizer Dual

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2 mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>90%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Make sure to print with enough perimeter shells to give them the required durability.<br>I printed with 3 shells and 3 bottom/top layers. Coarse resolution will probably do the job as well but due to the small size will have few influence on the printing duration.<br>Better check your settings before printing dozens of them in one run.</p></div>

Mosquito Net Spacer (5mm)

Mosquito Net Spacer (5mm)

Related Models